
Dove Harvard Shaker
Assembled
CARB: | Low Formaldehyde (CARB Phase II ) |
---|---|
BOX: | 1/2” Plywood Box Construction BOX: frame construction Solid Wood Face Frame |
Door: | Solid Wood Door with Medium-density fiberboard (MDF) Veneer Center |
Drawers: | Solid Wood Dovetailed Drawers with Undermount Epoxy Glides 3/4” Full Depth Adjustable Plywood Shelves box |
Hinges: | Concealed 6 Way Adjustable Hinges Standard Soft Close Hinge |
Finishes: | Available in seven finishes: Honey, White, Espresso, Toffee and Dove |
1. Face Frames
Face frames are ¾” × 1 ½” solid oak or birch hardwood. Frames are mortise and tenons construction reinforced with glue and nails. Frames are dadoed to receive cabinet ends, top, and bottoms.
2. Tops & Bottoms
Tops and bottom panels are ½” thick multi-ply birch hardwood plywood. Tops and bottoms are dadoed into the face frame and end panels.
3. Toe Kicks
Toe kicks shall be ½” thick × 4 ½ ” tall hardwood plywood.
4. End Panels
End panels are ½” thick multi-ply hardwood plywood. All end panels are dadoed into the face frame and recessed 3/16”.
5. Adjustable Shelves
Adjustable shelves are ¾” thick multi-ply birch hardwood plywood. Edge banded with matching wood tape.
6. Back Panels
Backs are ½ ” thick multi-ply birch hardwood plywood. Backs are routed, glued, and nailed in cabinet on all four sides.
7. Shelf Clips
Shelf clips are 6.8mm bore with a fluted plastic 2” long stem and self lock mechanism. Shelves are adjustable on 2 ½” increments.
All cabinets will be shipped Pre-Assembled and ready to install for your projects! There will need to be some installation on site of certain accessory items. These types of items include but are not limited to: fillers, moldings, toe kicks, some glass doors/shelves/inserts and roll out trays, panels etc.