White Harvard Shaker
|CARB:||Low Formaldehyde (CARB Phase II )|
|BOX:||1/2” Plywood Box Construction BOX: frame construction
Solid Wood Face Frame
|Door:||Solid Wood Door with Medium-density fiberboard (MDF) Veneer Center|
|Drawers:||Solid Wood Dovetailed Drawers with Undermount Epoxy Glides
Full Depth Adjustable Plywood Shelves box
|Hinges:||Concealed 6 Way Adjustable Hinges
Standard Soft Close Hinge
|Finishes:||Available in seven finishes: Honey, White, Espresso, Toffee and Dove|
1. Face Frames
Face frames are ¾” × 1 ½” solid oak or birch hardwood. Frames are mortise and tenons construction reinforced with glue and nails. Frames are dadoed to receive cabinet ends, top, and bottoms.
2. Tops & Bottoms
Tops and bottom panels are ½” thick multi-ply birch hardwood plywood. Tops and bottoms are dadoed into the face frame and end panels.
3. Toe Kicks
Toe kicks shall be ½” thick × 4 ½ ” tall hardwood plywood.
4. End Panels
End panels are ½” thick multi-ply hardwood plywood. All end panels are dadoed into the face frame and recessed 3/16”.
5. Adjustable Shelves
Adjustable shelves are ¾” thick multi-ply birch hardwood plywood. Edge banded with matching wood tape.
6. Back Panels
Backs are ½ ” thick multi-ply birch hardwood plywood. Backs are routed, glued, and nailed in cabinet on all four sides.
7. Shelf Clips
Shelf clips are 6.8mm bore with a fluted plastic 2” long stem and self lock mechanism. Shelves are adjustable on 2 ½” increments.
All cabinets will be shipped in flat pack. Our Cabinet Assembly videos will be available soon.